GibbsCAM是数控机床自动化程序，其优点是操作简单，功能强大，通过软件的模块，可以显着扩展此应用程序的基本功能。
由于直观的用户界面，可以访问管理几何，工具，轨迹，验证和后期处理的功能，这里的编程将变得更加灵活，因此理解用户可以创建最佳的处理程序。
GibbsCAM的建模功能有助于通过创建线框，表面和实体几何来准备几何来处理需求，值得注意的是模拟材质去除的工具，通过该工具可以精确显示整个加工过程，同时显示工件几何形状的变化以及所有可能的碰撞，计算的结果可以与模型的原始几何进行比较，发现材质或切割的残余物。
12.0.11.0 更新日志
Enhancements
– Added Save/ Load tool list to the API. (44278)
– Iscar Tool Advisor documentation has been updated to specify the new location. (47081)
– Tool position datain tool flyout in is now being displayed in a more user friendly way. (47303)
– When CRC is applied within Thread Milling Processes a warning message is produced that the value must be greater than 0 if CRC line is 0. (47565)
Bug Fixes
– Change process flyout no longer closes when choosing change process. (47571)
– Creating and deleting an alloy no longer causes an exception to occur. (47556)
– Within Custom Tool bars, entering a value in a highlighted field no longer opens geometry dialogs. (47564)
– Import DWG no longer draws & facets for each sheet during import, significantly decreasing the time to import the file. (47560)
– Zigzag no longer produces toolpath outside the boundaries of the geometry selected. (47579)
– Face angle value is now being preserved in lathe groove tools when using “Other”. (47580)
– Basic Utility Ops no longer shows up in Utility Group selection of process flyout. (47586)
– Edit Menu” Paste” no longer displays grayed out, when “By Diameter Range” dialog is open. Added support for unselected cut/copy passthrough for MCP edit control accelerator handling. (47573)
– Only when Mill MDDs have the capability for Util ops is the gray “U” icon is present. (47587)
– Disable cut fitting for helical features in simulation. (47581)
– Machine Sim – “Next Feature” performance is no longer dependent on simulation speed slider. (47567)
– Autodesk files now low via Vault PLM plug-in from Vault Professional. (47643)
– Machining CS is now properly being set in cases where there were multiple part stations in a part. (47582)
– Virtual Gibbs Migration tool properly migrates data when launched from the installer. (47182)
– Documentation on GeoTools has been updated to reflect current functionality. (46856)
– Documentation on TMS has been updated to reflect current functionality. (46898)
– Collision between Intermediate Tooling Fixture and the Part Station Table, is now being reported. (47585)
– Cut Color Mode is no longer being overridden during Machine Sim. (47663)
– Redoing legacy VoluMill operations no longer removes toolpath from the second Volumill operation. (47664)
– Ignore Stock option in VoluMill is no longer always enabled. (47665)
– Threadmilling process no longer gets corrupted last used values causing a crash. (47562)
– Form tools that were not fully defined can now be deleted. (47657)
– Lathe Rough Process ‘Xr Stock’ values no longer produce undesirable Rapid Retract moves. (47591)
– Chamfer angle of tools created within AutoWiz now properly match the hole feature angle. (44322)
